FMS P51 Mustang ARTF w/Retract w/o TX/RX/BAT - Petie 2nd (V8)

RRP 309.99



This version 8 of the FMS P51D Mustang has the most scale detail and most refined features of nearly any EPO foam RC plane on the market. The attention to detail and quality is simply amazing. The ailerons, elevator, and rudder feature 17g metal gear servos and the servoless e-retracts feature metal trunnions for extra durability. The landing gear struts on the FMS P51D are all metal and shock absorbing. The large tires and shock absorbing struts allow for easy flight from a grass field and also help to take the force out of an occasional hard landing. The flaps on the FMS P51 feature an extra slow moving servo for scale detail. The inner and outer landing gear doors open and close using a sequencer to allow for the most detailed landing gear ever seen on an FMS P-51 Mustang. In addition to all the features, the FMS P-51 is simply an amazing flyer. The latest version features a scale sequencer, battery tray, metal gear servos, and many more updated features.

FMS P-51D Mustang Features:

  • Upgraded, shock absorbing struts
  • Scale details like sliding canopy, functional air scoop, drop tanks (removable) and sequenced landing gear doors
  • Realistic 14" Four Blade Propeller
  • Scale pilot figure
  • Reinforced control surfaces (ailerons, elevator, and rudder)
  • High visibility LED navigation lights
  • Full functioning drop-hinge flaps for quick takeoffs and smooth landings
  • Durable EPO Foam

Spec Check:

  • Wingspan: 1450mm / 57.0in
  • Length: n1240mm / 49.0in
  • Flying Weight: 2350g / 82.9oz
  • CG (Center of Gravity): 110mm from Leading Edge
  • Power System: 4250-Kv540 Brushless Motor
  • Electronic Speed Control: 70A ESC, Internal 5A SBEC, T Connector
  • Propeller / EDF: 14x8 Four Blade Propeller
  • Servos: 9g6 and 17gx3
  • Landing Gear: Electronic Retracts (main gear and tail)
  • Required Battery: 14.8V 3000 - 3600 mAh 30C 4 cell LiPo
  • Ailerons: Yes
  • Elevator: Yes
  • Rudder: Yes
  • Flaps: Yes
  • Lights: Yes
  • Material: EPO Foam
  • Build Time: 2 Hours

Please Note: This plane is sold in ARTF (almost-ready-to-fly) format and requires the following for completion. 6 channel transmitter, 6 channel receiver, 14.8V 3000 - 3600 mAh 30C 4 cell Lipo Battery & LiPo battery charger.

payments by sagepay paypal visa mastercard