Precision Aerobatics Extra 260 Yellow

Designed with a technical challenge of having both precision and extreme agility in mind, the PA Extra 260 will perform the most demanding aerobatics maneuver with the finesse of precision to boot, providing unparallel predictability that will take your aerobatic performance to another level.
The 260 excels in all tumbling maneuvers. Violent walls, violent snaps, spins (representative of full-scale aircraft) are just some of the high-speed, high-energy maneuvers the Extra 260 is capable of performing. On the post-stall extreme freestyle end, the Extra 260 is fully capable of executing one of the best, well balanced rolling harriers (extremely slow and persistent), slow stable harriers (both upright and inverted) with absolutely no wing rock. Extremely stable elevators (allowing long elevators all the way down to a spot landing), tight and stable harrier turns. Transitions into high Alpha are extremely smooth and stable. The 260 also Knife Edges with the accuracy to perform KE circuits adds a further dimension of precision to the overall flight performance. In a nutshell this is the Extra with THE ALL THE EXTRAS thrown in!
* Wings and ailerons that are pre hinged and sealed!
* Pre-installed airfoil vertical stabilizer
* CA hinges already pre-glued on the rudder side and CA hinge slots pre-cut on the fuselage side.
* Airfoil horizontal stabilizer with the elevator pre-hinged and sealed.
* Anti rotation pins are pre glued
* The pre cut cowling is made of fiberglass and is reinforced with carbon fiber. Its aerodynamic design allows air to flow in and cool the motor, battery and ESC for maximum setup efficiency. Two air scoops are also included in the kit.
* Prefabricated and pre-painted tinted canopy and hatch as one integral unit attached to the model with very strong magnets.
* High quality prefabricated kevlar pull-pull system already pre-glued and crimped.
* Pre drilled stiff CF landing gear and pre-installed blind nuts in the fuselage for quick installation.
* The motor box is pre-glued with the correct thrust line already built in (taking away the guess work).
* The composite firewall is pre-drilled ready for any standard A30 class size outrunner installation.
* Wheel pants are pre cut (optional carbon wheel pants are available)
* Semi-fabricated CF push rods.
* Pre-drilled CF control horns and Pull-Pull CF servo arm.
* Pre-installed battery and RX Velcro fasteners.
* Pre-assembled tail wheel.

Specifications
Wingspan: 1219mm /48in
Length: 1094mm /43in
Flight Weight: approx 955gr/33.7oz
Wing Area: 490 sq.in
Wing Loading: approx 9.9oz/sq.ft